LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Body Panels) >> Trunk Lid Stay Damper Disposal

Trunk Lid Stay Damper Disposal

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The gas in the stay damper is colorless, odorless, and non-toxic.
  1. Wear protective eye wear.
  2. Lay the stay damper flat.
  3. Saw 2-3 mm {0.08-0.11 in}  into the stay damper using a hacksaw, and allow the gas to escape from the stay damper.
  4. Verify that the gas has escaped from the stay damper.
  5. Discard the stay damper.
    Fig 1: Cutting Stay Damper With Hacksaw
    G02566594Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals