Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stud into the hole in the wheel hub.
- 1.1. Start the serrated stud into the hole in the wheel hub by tapping lightly with a hammer.
- 1.2. The stud must be square with the wheel hub before pressing on the arbor press.
- Install the rotor. Refer to Wheel Hub, Bearing & Seal Replacement (AWD) or Wheel Hub, Bearing & Seal Replacement (RWD) .