Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel stud to the wheel hub and bearing assembly.
- Install 4 washers and the nut to the wheel stud. Tighten the wheel stud nut to 130 N.m (95 lb ft), drawing in the wheel stud.
- Remove the nut and the washers from the wheel stud.
- Install the rotor.
- Install the tire and the wheel.
- Lower the vehicle.