LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 734 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement (RWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft insulators on the stabilizer shaft. Position the slit on the insulator toward the front of the vehicle.
  2. Install the stabilizer shaft.
  3. Install the stabilizer shaft brackets over the stabilizer shaft insulators.
  4. Install the stabilizer shaft bracket mounting bolts. Tighten the stabilizer shaft bracket mounting bolts to 36 N.m (27 lb ft).
  5. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement (RWD)  or Stabilizer Shaft Link Replacement (AWD)  .
  6. Install the tire and wheel.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals