Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the retainer and the insulator to the stabilizer shaft link bolt. Position the parts correctly.
- Install the stabilizer shaft link bolt through the lower control arm hole.
- Install the stabilizer shaft link retainers, insulators, and stabilizer shaft link to the stabilizer shaft link bolt.
- Insert the stabilizer shaft link bolt through the stabilizer shaft and install the stabilizer shaft link insulator and retainer.
- Install the stabilizer shaft link bolts through the stabilizer shaft.
- Install the insulators and retainers to the stabilizer shaft link bolt.
- Install the stabilizer shaft link retaining nut to the stabilizer shaft link bolt. Tighten the stabilizer shaft link retaining nut to 17 N.m (13 lb ft).
- Install the tire and wheel.
- Lower the vehicle.