Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Using a pry bar, lower the stabilizer shaft.
- Install the stabilizer shaft insulator to the stabilizer shaft. Position the slit on the stabilizer shaft insulator toward the front of the vehicle.
- Install the stabilizer shaft bracket over the stabilizer shaft insulator.
- Install the stabilizer shaft bracket retaining bolts. Tighten the stabilizer shaft bracket retaining bolts to 36 N.m (27 lb ft).
- Lower the vehicle.