LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 734 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement (AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a pry bar, lower the stabilizer shaft.
  2. Install the stabilizer shaft insulators to the stabilizer shaft. Make sure the slit in the stabilizer shaft insulator faces forward.
  3. Install the stabilizer shaft brackets to the stabilizer shaft insulators.
  4. Install the stabilizer shaft bracket mounting bolts (right hand).
  5. Install the stabilizer shaft bracket mounting bolt and nut (left hand). Tighten the stabilizer shaft bracket mounting bolts and the nut to 55 N.m (41 lb ft).
  6. Install the idler arms to the frame.
  7. Install the idler arm mounting bolts. Tighten the idler arm mounting bolts to 105 N.m (77 lb ft).
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals