Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shock absorber to the vehicle.
Important: Position the bolts in the same direction that they removed or suspension clearance may be affected.
- Install the shock absorber mounting bolts.
- Install the new shock absorber mounting nuts and the washers. Tighten the shock absorber mounting nuts to 62 N.m (46 lb ft).
- Install the wheelhouse splash shield.
- Install the tire and wheel.
- Lower the vehicle.
- Dispose of the shock absorber. Refer to Shock Absorber Disposal .