Shift Lever - Assemble - Off Vehicle
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift lever seal (2) onto the shift lever assembly (4).
- Install the shift lever assembly (4).
- Install the shift lever screw (3) into the shift lever assembly (4). Tighten the screw to 1.5 N.m (13 lb in).
- Slide the shift lever seal (2) down the shift lever assembly (4).
- Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .
- Enable the inflatable restraint steering wheel J module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .