LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 730 (Steering Linkage (Non-Rack & Pinion)) >> Repair Instructions >> Pitman Arm Replacement (AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks made on the pitman arm during removal in order to install the pitman arm on the pitman shaft.
  2. Install the washer and the pitman arm retaining nut. Tighten the pitman arm retaining nut to 250 N.m (185 lb ft).
  3. Install the power steering gear. Refer to POWER STEERING GEAR REPLACEMENT (RWD) or POWER STEERING GEAR REPLACEMENT (AWD) .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals