Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the power steering cooler pipe to the vehicle.
- Install the power steering cooler pipe (2) to the air baffle (3).
- Connect the power steering cooler pipe to the steering gear. Tighten the power steering cooler pipe to the steering gear to 27 N.m (20 lb ft).
- Lower the vehicle.
- Connect the power steering cooler hose to the steering pump.
- Bleed the power steering system. Refer to Bleeding Power Steering System .