Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not start the engine with any power steering hose disconnected, or damage to the components could occur.
- Install the hydraulic brake booster outlet hose to the vehicle.
- Connect the hydraulic brake booster outlet hose I to the hydraulic brake booster. Tighten the hydraulic brake booster outlet hose to the hydraulic brake booster to 27 N.m (20 lb ft).
- Connect the hydraulic brake booster outlet hose to the power steering gear. Tighten the hydraulic brake booster outlet hose to the power steering gear to 27 N.m (20 lb ft).
- Remove the drain pan.
- Install the hydraulic brake booster outlet hose tie straps.
- Bleed the system. Refer to Bleeding Power Steering System .