LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 729 (Power Steering System) >> Repair Instructions >> Power Brake Booster Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do not start the engine with any power steering hose disconnected, or damage to the components could occur.
  1. Install the hydraulic brake booster inlet hose to vehicle.
  2. Connect the hydraulic brake booster inlet hose to the hydraulic brake booster.
  3. Raise the vehicle.
  4. Connect the hydraulic brake booster inlet hose to the power steering pump. Tighten the hydraulic brake booster inlet hose to the power steering pump to 27 N.m (20 lb ft).
  5. Bleed the system. Refer to Bleeding Power Steering System  .
scientia non olet · About LEMON Manuals