Installation Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear compartment lid lock striker to the vehicle.
- Install the rear compartment lid lock striker nuts (1) to the lock striker.
Hand tighten the rear compartment lid lock striker nuts.
- Adjust the rear compartment lid alignment and closing effort as necessary.CAUTION: Refer to FASTENER NOTICE .
- Tighten the rear compartment lid lock striker nuts.
Tighten
Tighten the nuts to 7 N.m (62 lb in).
- Install the rear bumper fascia. Refer to FASCIA REPLACEMENT - REAR BUMPER .
- Install the rear compartment sill trim plate. Refer to Compartment Sill Plate Replacement - Rear .
- Close the rear compartment.