LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 724 (Exhaust System) >> Exhaust System Removal/Installation >> Main Silencer Removal Note >> Except for California emission regulation applicable model

Except for California emission regulation applicable model

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ABS wheel-speed sensor wiring harness connector.
  2. Disengage the brake pipe mount from bracket.
    Fig 1: Locating Brake Pipe Mount - Except For California Emission Regulation Applicable Model
    G00973700Courtesy of MAZDA MOTORS CORP.
  3. Remove the rear shock absorber lower bolts. (See REAR SHOCK ABSORBER REMOVAL/INSTALLATION .)
  4. Loosen the rear crossmember component installation bolts (6 locations) and lower the rear crossmember component approx. 70 mm {2.8 in}.  (See REAR CROSSMEMBER REMOVAL/INSTALLATION .)
  5. Remove the main silencer.