Test Description
WARNING: This page is about a different car, the 2002 GMC Cab & Chassis Sierra and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The numbers listed below refer to step numbers in the diagnostic procedure:
- 3
This step isolates the stoplamp switch as a source for setting the DTC. - 5
This step tests for a short to ground between the fuse and the stoplamp switch. - 7
This step tests for a short to ground in circuit 17. - 8
This step removes the PCM from circuit 17 as the source of a short to ground.