LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Engine Mechanical (Service Information)) >> Timing Chain Removal/Installation >> Cylinder Head Cover Installation Note

Cylinder Head Cover Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION:
    • Install the cylinder head cover within 10 min of applying the silicone sealant.
  1. Apply silicone sealant to the mating faces as shown in the figure.

    Thickness 

    4.0-7.0 mm {0.16-0.24 in} 

  2. Install the cylinder head cover with a new gasket.
    Fig 1: Identifying Mating Faces For Silicone Sealant Application
    G00973758Courtesy of MAZDA MOTORS CORP.
  3. Tighten the bolts in the order shown in the figure.

    Tightening Torque 

    8.0-10.5 N.m {81.6-107.1 kgf.cm, 70.9-92.9 in.lbf} 

    Fig 2: Cylinder Head Cover Bolt Tightening Sequence
    G00973759Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals