LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Engine Mechanical (Service Information)) >> Drive Belt Auto TENSIONER Inspection

Drive Belt Auto TENSIONER Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. (See DRIVE BELT REPLACEMENT .)
  2. Verify that the generator drive belt auto tensioner moves smoothly in the operational direction.
    • If it does not move smoothly, replace the generator drive belt auto tensioner.
    Fig 1: Inspecting Generator Drive Belt Auto Tensioner
    G00973722Courtesy of MAZDA MOTORS CORP.
  3. Turn the generator drive belt auto tensioner pulley by hand and verify that it rotates smoothly.
    • If it does not move smoothly, replace the generator drive belt auto tensioner.
  4. Install the generator drive belt. (See DRIVE BELT REPLACEMENT .)
scientia non olet · About LEMON Manuals