LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 713 (Body Front End) >> Repair Instructions >> Hood Bumper Replacement (Side) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the adjustable front hood bumper (1) to the radiator support by rotating clockwise.
    Fig 1: Installing Adjustable Front Hood Bumper
    G01780131Courtesy of GENERAL MOTORS CORP.
  2. Install the hood side bumper (1) to the fender.
  3. Adjust the hood height by rotating the front hood bumpers clockwise/counterclockwise until the hood is flush with the front fender.
    Fig 2: Installing Hood Side Bumper
    G01780132Courtesy of GENERAL MOTORS CORP.