Installation Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Apply thread locker to all of the flywheel bolts. Use GM P/N 12345382 or an equivalent.
- Install the flywheel.
- Install the flywheel spacer.CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the flywheel bolts.
Tighten
Tighten the flywheel bolts to 83 N.m (61 lb ft).
- Install the transmission. Refer to TRANSAXLE in Automatic Transaxle 4T40-E/4T45-E.