Removal Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Refer to Draining and Filling Cooling System .
- Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
- Disconnect the engine coolant heater cord from the engine coolant heater.
- Loosen the engine coolant heater bolt. Do not remove the engine coolant heater bolt.
- Remove the engine coolant heater.
- Clean the engine coolant heater opening.