LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 694 (Seat System) >> Repair Instructions >> Seat Back Bolster Cover and Pad - Split Folding >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back bolster. Refer to Seat Back Bolster Replacement - Rear Split Folding  .
  2. Pull the rear seat back bolster cover over the U-bracket.
    Fig 1: Pulling Rear Seat Back Bolster Cover Over U-Bracket
    G01780623Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear seat back bolster cover from the pad by pulling down and off the pad.
    Fig 2: Removing Rear Seat back Bolster Cover
    G01780624Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals