Removal Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the trim panel from the lower center pillar. Refer to TRIM PANEL REPLACEMENT - LOWER CENTER PILLAR .
- Remove the anchor bolt from the front seat belt.
- Remove the shoulder belt guide cover.
- Remove the shoulder belt guide bolt.
- Remove the shoulder belt guide.
- Remove the seat belt guide clip. Squeeze the guide clip from both sides in order to release the retainers.
- Remove the seat belt retractor bolt.
- Pull the retractor upward in order to disengage the retractor.
- Remove the seat belt retractor assembly.