Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Position the buckle assembly to the floor panel stud.
- Install the rear seat belt buckle nuts. Tighten the nuts to 53 N.m (39 lb ft).
- Fold the rear seat down.
- Pull the seat belt buckles through the seat cushion.