Removal Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Open the door.
- Remove the sill plate. Refer to DOOR SILL PLATE REPLACEMENT - FRONT .
- Remove the hinge pillar trim panel. Refer to TRIM PANEL REPLACEMENT - HINGE PILLAR .
- Remove the windshield pillar molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR .
- Remove the weatherstrip from the rear side door opening. Peel the unit away from channel, pulling the weatherstrip from the pinchweld flange.