LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Door System, Mirror System & Window System) >> Description and Operation >> Power Door Locks Description and Operation >> Passenger Door Unlock Operation (Uplevel Vehicles)

Passenger Door Unlock Operation (Uplevel Vehicles)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

When any of the door lock switches are placed in the unlock position, voltage is applied to the door unlock control circuit and the unlock relay winding and the BCM. Since the other side of the unlock relay winding is connected to ground, the relay is energized. This causes the contacts to close and complete the path from the DR LOCK fuse through the battery voltage circuit. Voltage is then applied through the UNLOCK fuse to the unlock side of the door lock actuators. Since the other side of the door lock actuators are connected to the normally closed contacts of the lock relay to ground, the doors unlock.

The unlock function can also be accomplished by the BCM supplying voltage to the door lock control circuit during any of the following:

scientia non olet · About LEMON Manuals