Oil Pump, Pump Screen and Deflector Removal
WARNING: This page is about a different car, the 2002 GMC Yukon XL, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bolt that attaches the oil pump to the rear crankshaft bearing cap.
- Remove the oil pump, driveshaft and retainer from the rear crankshaft bearing cap.
- Separate the oil pump, driveshaft and retainer.
- Discard the driveshaft retainer.
- Remove the crankshaft oil deflector nuts.
- Remove the crankshaft oil deflector.