Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Snap the grille ends into the fender.
- Install the screw holding the grille to the latch support. Tighten the grille screw to 9 N.m (75 lb in).
- Using a Phillips screwdriver, rotate the grille retainer 1/4 turn clockwise.
- Install the upper grille baffle.
- Close the hood.
- Inspect for proper alignment.
- For diesel only, install the winter cover, if removed.