Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new lock cylinder (2) by pressing inwards until it is seated.
- Install the retaining clip (1).
- Ensure the linkage for the top compartment door are all connected before installing the inside panel.
- Install the inside panel.
- Install the 11 screws. Tighten the screws to 1.6 N.m (14 lb in).
- Inspect the operation of the top compartment door.
- Install the compartment door to the console.