Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lower I/P trim panel to the I/P assembly.
- Connect the following electrical components:
- The power outlet ports (1, 2)
- The ashtray lamp (3)
- The I/P compartment lamp, if equipped
- Install the screws connecting the lower trim panel to the I/P assembly. Tighten the screws to 2 N.m (18 lb in).
- Install the following components, depending on how equipped:
- The I/P cupholder cover, shown
- The I/P cupholder
Refer to Cupholder Replacement (Except Pro) or Cupholder Replacement (Pro) .
- The floor console extension
Refer to Console Replacement (Luxury Console) , Console Replacement (Base Console) or Console Replacement (Pro) .
- Install the I/P cluster trim bezel. Refer to Instrument Panel Cluster (IPC) Replacement .