Removal Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- From the back of the IP extension remove the 2 retaining bolts from the bracket.
- Remove the console assembly from the vehicle. Refer to Console Replacement (Luxury Console) , Console Replacement (Base Console) or Console Replacement (Pro) .
- Place the console assembly on a work bench.
- Disconnect the wire connectors.
- Remove the 12V power supply. Refer to 12-Volt Power Supply Replacement .
- Remove the screws attaching the console to the front extension.
- Remove the IP extension from the console.