Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the console storage bin and lid assembly to the console.
- Install the 2 retaining bin screws. Tighten the screws to 2 N.m (18 lb in).
- Install the rear cupholder by pushing the unit in until the cupholder locks into place.
- Install the 4 bolts retaining the console to the bracket. Tighten the bolts to 2 N.m (18 lb in).
- Install the bin screws. Tighten the screws to 2 N.m (18 lb in).
- Close the console.