LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 6.6L (On-Vehicle)) >> Removal & Installation >> Water Pump >> Installation

Water Pump: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate water pump O-ring with engine oil. Install water pump. Install water pump bolts. Ensure correct length bolt is used in proper location.
  2. Install water pump- to-water pump outlet pipe gasket. Install engine wiring harness retainer on water pump outlet pipe inner stud. Install water pump-to-water pump outlet pipe nuts.
  3. Install thermostat housing crossover. See THERMOSTAT HOUSING COVER . Install crankshaft balancer. See CRANKSHAFT BALANCER . Install fan clutch. See FAN BLADE ASSEMBLY . Fill engine with coolant. See DRAINING & REFILLING COOLING SYSTEM . Install left front fender wheelhouse inner panel.
scientia non olet · About LEMON Manuals