LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 6.6L (On-Vehicle)) >> Removal & Installation >> Intake Manifold >> Installation (Left)

Installation (Left)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a 1/8" (2-3 mm) wide to 1/16" (0.5-1.5 mm) high bead of Sealer (GM 12378521) to sealing surface of intake manifold.
  2. The left side and right side intake manifolds are not interchangeable. Install intake manifold to cylinder head. Install intake manifold 9 bolts and 2 nuts.
  3. Install intake manifold tube. Install left fuel rail assembly. Install fuel junction block. Install turbocharger assembly.
scientia non olet · About LEMON Manuals