LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 6.6L (On-Vehicle)) >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure cylinder bore diameter .79" (20 mm), 3.8" (96 mm) and 6.1" (155 mm) below cylinder block deck surface. Measure piston diameter at 90-degree angle to piston pin and on pin center line.
  2. Determine piston clearance. See PISTONS, PINS & RINGS  and CYLINDER BLOCK  tables under ENGINE SPECIFICATIONS. If clearance is not within specification, replace piston and/or machine cylinder bore.
scientia non olet · About LEMON Manuals