Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Install the center rear seat belt anchor plate under the rear seat back hold-down.
- Ensure the center rear shoulder belt is not twisted.CAUTION: Refer to FASTENER NOTICE .
Important: Assure that the fastener threads and fastener hole are free of any sealer patch material.
- Install the center rear seat belt anchor fastener.
Tighten
Tighten the center rear seat belt anchor fastener to 41 N.m (32 lb ft).
- Install the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT -- REAR .