Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear seat belt buckle anchor plate under the rear seat back hold- down.CAUTION: Refer to FASTENER NOTICE .
Important: Assure that the fastener threads and fastener hole are free of any sealer patch material.
- Install the rear seat belt buckle anchor fasteners.
Tighten
Tighten the rear seat belt buckle anchor fasteners to 41 N.m (32 lb ft).
- Insert the seat belt buckles into the seat back pockets.
- Install the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT -- REAR .