Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
- Position the cruise control lever (2) in the opening on the steering wheel.CAUTION: Refer to FASTENER NOTICE .
- Install the cruise control lever retaining screws (1).
Tighten
Tighten the cruise control lever retaining screws (1) to 2.30 N.m (20 lb in).
- Install the access plate.
- Install the steering wheel. Refer to Steering Wheel Replacement .