Removal Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front and the rear leg trim covers.
- Remove the seat back recliner handle screw from the trim panel, if equipped.
- Remove the jack assembly, if required.
- Remove the covers in order to access the seat bolts.
- Disconnect the electrical connectors, if equipped.
- Remove the seat retaining bolts.
- Remove the seat from the vehicle.