LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 647 (Power Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Rear (60/40 Split - 50/50 Split) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Seat Cushion Frame
    GM276326Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion frame (5).
    2. Fig 2: Installing Seat Cushion Trim Cover & Pad
    GM833284Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts to the hinge assembly, if removed.

    Tighten:  Tighten to 7 N.m (61 lb in).

  3. Install the seat cushion trim cover (8) and the pad (7). Refer to Seat Cushion Cover and Pad Replacement - Rear (60/40 - 50/50 Split)  or Seat Cushion Cover and Pad Replacement - Rear (Bench) .
scientia non olet · About LEMON Manuals