Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear seat armrest to the pivot point on the rear seat.
- Install the armrest bolts (6).
Tighten: Tighten the bolts to 9 N.m (80 lb ft).
- Install the armrest trim cover (7) and screws (8).
- Fold the right rear seat back into the upright position.
NOTE:
Refer to FASTENER NOTICE
.