Removal Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to DISABLING SYSTEM in SIR.
- Remove the ignition switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle .
- Remove the turn signal cancel cam. Refer to Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle .
- Remove the park lock cable from the lock cylinder housing.
- Remove 3 TORX® screws.
- Remove the lock cylinder housing from the steering column.
CAUTION:
Refer to SIR CAUTION
in Cautions and Notices.