Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Release the park brake.
Raise and support the vehicle.
Remove the park brake cable from the equalizer by pulling down on the intermediate cable and release the cable from the equalizer bar.

Fig 1: Park Brake Cable Equalizer
Courtesy of GENERAL MOTORS CORP.
Remove the cable from the mounting bracket by depressing the locking tabs.

Fig 2: Park Cable Mounting Bracket
Courtesy of GENERAL MOTORS CORP.
Remove the cable at the lower shock absorber mount by removing the bolt.

Fig 3: Park Cable At Lower Shock Absorber Mount
Courtesy of GENERAL MOTORS CORP.
Remove the rear cable mounting bracket bolt.

Fig 4: Rear Park Cable Mounting Bracket Bolt
Courtesy of GENERAL MOTORS CORP.
Remove the cable from the lever.

Fig 5: Park Brake Cable At Lever
Courtesy of GENERAL MOTORS CORP.
Remove the cable (2) from the rear brake cable mounting bracket (3) by depressing the locking tabs (1) on the brake cable.

Fig 6: Rear Brake Cable Mounting Bracket & Locking Tab
Courtesy of GENERAL MOTORS CORP.
Remove the cable from the guides and the body mounts.

Fig 7: Park Brake Cable Guides & Body Mounts
Courtesy of GENERAL MOTORS CORP.