LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (Parking Brake System) >> Repair Instructions >> Park Brake Actuator Replacement (25/35 Series) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the actuator lever to the backing plate.
  2. Install the park brake shoe. Refer to Park Brake Shoe Replacement (Except RPO NYS, 25/35 Series)  or Park Brake Shoe Replacement (25/35 Series)  .
  3. Adjust the park brake shoe. Refer to Park Brake Adjustment .
  4. Install the rotor. Refer to BRAKE ROTOR .
  5. Install the rear park brake cable to the park brake actuator lever.
  6. Tighten the nut to the intermediate cable at the equalizer. Tighten the nut to 3.5 N.m (31 lb in).
  7. Install the tire and wheel assembly.
  8. Remove the safety stands.
  9. Lower vehicle.
  10. Adjust park brake cable. Refer to Park Brake Adjustment .
scientia non olet · About LEMON Manuals