LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 640 (Hydraulic Brakes) >> Repair Instructions >> Vacuum Brake Booster Check Valve And/Or Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the vacuum brake booster check valve from the vacuum brake booster.
  2. Remove the vacuum brake booster hose clamp at the check valve.
  3. Remove the vacuum brake booster check valve from the hose.
  4. Remove the manifold sight shield.
  5. Disconnect the vacuum brake booster hose at the engine.
    Fig 1: Vacuum Brake Booster Hose At Engine
    G01669058Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the vacuum brake booster hose.
  7. Remove the vacuum brake booster hose from the vehicle.
scientia non olet · About LEMON Manuals