Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outlet heater hose.
- Install the outlet heater hose to the outlet pipe assembly.
- Install the auxiliary outlet heater hose if equipped.
- Install the NEW outlet heater hose nut (2) and bolt (3) to the engine. Tighten the nut and bolt to 25 N.m (18 lb ft).
- Connect the outlet heater hose to the heater core. Firmly push the quick connect onto the heater core pipe until you hear an audible click.
- Install the outlet heater hose to the mounting clip.
- Install the air intake tube.
- Fill the cooling system.