Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the A/C compressor hose assembly to the vehicle.
- Connect the A/C recirculation switch to the A/C compressor hose assembly.
- Install the A/C compressor hose to the condenser using new sealing washers. Refer to Sealing Washer Replacement .
- Install the NEW nut to the condenser. Tighten the nut to 16 N.m (12 lb ft).
- Install the upper radiator baffle.
- Install the A/C compressor hose assembly to the accumulator using new sealing washers.
- Install the NEW nut to the accumulator. Tighten the nut to 16 N.m (12 lb ft).
- Install the A/C compressor hose assembly to the accumulator to A/C compressor using new sealing washers.
- Install the NEW A/C compressor hose assembly mounting bolt (2). Tighten the bolt to 34 N.m (25 lb ft).
- Evacuate and recharge the A/C system. Refer to Refrigerant Recovery & Recharging .
- Leak test the fittings of the component using the J 39400-A .