LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Bumpers) >> Repair Instructions >> Impact Bar Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bumper impact bar to the frame.
    Fig 1: Identifying Rear Bumper Impact Bar
    G01755643Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts to the rear bumper impact bar at the frame. Tighten the bolts to 25 N.m (18 ft lbs).
  3. Install the rear bumper energy absorber. Refer to Energy Absorber Replacement - Rear .
  4. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .
scientia non olet · About LEMON Manuals