Installation Procedure
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear bumper fascia reinforcement to the rear bumper fascia.
- Insert the tabs into the slots.
- Bend the tabs over the rear bumper fascia.
Bend the tabs flat against the bumper fascia. Do not allow the tabs to protrude over the top surface of the bumper fascia.
- Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .