LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 631 (Body Rear End) >> Repair Instructions >> Wiring Harness Replacement - Door (Cargo Door) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door .
  2. Fig 1: Door Wiring Harness (Cargo Door)
    GM577898Courtesy of GENERAL MOTORS CORP.
  3. Remove the wiring contact screws.
  4. Disconnect the door wiring contact connector(s).
  5. Disconnect the window defogger wiring connectors.
  6. Disconnect the power door lock actuator connector (RHS only).
  7. Disconnect the door ajar switch connectors.
  8. Disconnect the key switch connector (RHS only).
  9. Remove the wiring harness clips.
  10. Remove the wiring harness from the door.